top of page
Inuinnaqtun Pitiksiliurniq web banner.pn

INUINNAQTUN PITIKSILIURNIQ

THE INUINNAQTUN BOW MAKING TRADITION

PITIKHIIT / THE BOWS

When Inuinnait culture was first documented by anthropologists in the early 20th century, their bow building tradition included two wooden sinew-backed bow designs. The most common, and most difficult to make was the ihualik. This bow was constructed of three bent pieces of wood joined by splices that were glued with caribou blood, and wrapped in braided sinew together with a splint and a strip of seal skin. The braided sinew wrap at the joints formed part of the braided sinew backing which covered the entire back of the bow.

CD2003-0396-026_archer_51167_10.jpg

Inuinnaq archer with an ihualik on Victoria Island May 19, 1916 (John Hadley/CMC/51167)

The other type of sinew-backed bow that was used by Inuinnait was made of one piece of wood. The ihuin'naqtaq style of bow was owned by only one hunter that anthropologist Diamond Jenness met during the period of 1914 to 1916. The technology for the ihuin'naqtaq was much the same as the ihualik, however without the splices and the bending and shaping of the wood. 

Ihualik - Digital Illustration.png
Ihuinngaqtaq - Digital Illustration.png
Third Bow - Digital Illustration.png

Diagram of an Ihualik

Diagram of an Inuin'ngaqtaq

Bow made from muskox horn and antler. 

S92-3925 - reduced.png

Canadian Museum of History, IV-D-1277, S92-3925

D2004-19729 - reduced.tif

Canadian Museum of History, IV-D-72, D2004-19729

D2005-07209 - reduced.png

Canadian Museum of History, IV-D-1789, D2005-07209

bottom of page